Concrete is one of the easiest materials to come by and it fairly costs less than other materials. It is strong, rustic, and easy to handle. But most importantly, it can be used in wide applications across the spectrum to make so many things. A case in point is this DIY concrete planter with dowel feet. And do you know how it was made? In a cardboard box! Yes, that is correct. This rustic planter was made with concrete using a cardboard box as mold.

Let’s learn how you can make this at home without much fuss or cost.

Here is what you need:

  • An empty cardboard box
  • Four Dowels or substitute them for four wooden pegs
  • Concrete
  • Cellophane Wrap
  • Small Plastic Cup or Planter

Also Read: How to Make Cement Planter With Old Towel or Cloth

Low-Cost DIY Concrete Planter With Dowel Feet

Making this DIY concrete planter is very easy. Begin by wrapping the box with cellophane from the inside. This step is not necessary but it prevents concrete from sticking to or tearing through the cardboard and give it a textured look. You can skip this step if you want.

Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma

Next cut holes in the corners to fit in the dowels. Make sure to mark the points to the dowel size to avoid cutting more than required.

Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma

Although this step is also optional, but you can stick the dowel feet to a flat surface using a double-sided tape so the feet don’t move during the pouring or curing process.

Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma

Once the mold is prepared, mix the concrete with water to a thick consistency. When you have the desired thickness of concrete, pour it into the box halfway through.

Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma

Then fill the plastic cup or planter with sand or pebbles so it becomes heavy and place it inside the concrete box to create a hole to plant things in. Make sure it is centered to have a uniform design or you can choose asymmetry as well.

Image: Homecrux/Rishik Sharma

When the smaller vessel is nice and snug inside the mold, fill in the gaps to achieve the desired height of the planter.

Image: Homecrux/Rishik Sharma

Now let it set for 24-48 hours. Once the concrete is cured, remove the box mold and the cellophane. Take out the planter or cup inside and sand the rough surfaces if you like.

Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma

The cellophane creates a primitive sort of texture on the concrete, giving a nice rustic-looking vessel, in which you can plant any low-maintenance plant. We planter a geranium inside ours.

Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma

Check out the video tutorial below and let us know what you think of this DIY. Would you be doing it yourself?

Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma
Image: Homecrux/Rishik Sharma

Follow Homecrux on Google News!

Share.

Listening to her grandmother weaving nighttime tales to penning down her own thoughts, Priya developed a penchant for stories and their origin early in her childhood. After her master's in literature, she started writing copiously on diverse topics including architecture, interior design trends, and home improvement while learning the ropes of copyediting. For the past couple of years, she has been crafting DIYs for Homecrux. Reading novels, painting, and baking are her favorites on her long list of hobbies. She also loves to eat, travel, meet new people, learn about different cultures, and listen to stories.

Leave A Reply

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The reCAPTCHA verification period has expired. Please reload the page.

Exit mobile version